• 9PX 2000 is available in RT2U format (optimised for rack mounting), pedestal and rail kits are included with all models.
• The internal bypass allows service continuity in case of an internal fault, for easy replacement of the UPS.
• Stronger, longer battery life: Eaton ABM? battery management technology uses an innovative three-stage charging technique that extends battery life by up to 50%.
• More runtime can be added with up to 4 external hot-swappable battery modules, able to run systems for hours if necessary.

Manageability

• The graphical LCD provides clear information on the UPS’s status and measurements on a single screen. Enhanced configuration capabilities are also available.
• 9PX can meter energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton Intelligent Power Software.
• Load segment control enables prioritised shutdown of non-essential equipment to maximise battery runtime for critical devices.
• 9PX offers Serial and USB connectivity, plus an extra slot for an optional communication card. Eaton’s Intelligent Power Software seamlessly integrates with leading virtualisation environments and cloud orchestration tools.

Technical Specifications

• Rating (VA/W) 2000VA/1800W

Electrical Characteristics

• Technology: Online double conversion with Power Factor Correction (PFC) system
• Nominal voltage: 200/208/220/230/240V
• Input voltage range: 176-276V without derating (up to 100-276V with derating)
• Input frequency range: 40-70Hz, 50/60Hz auto-selection, frequency converter mode
• Efficiency: up to 93% in online mode (up to 98% in Hi-efficiency mode)

Connections

• Input: (1) IEC C14 (10A)
• Outputs: (4) IEC 13 ( 10A) + (2) AUS GPO (10A)
• Switched Outlet Group: 2 outlet groups
• Switched Outlet: (2) IEC C13 (10A) + (2) AUS GPO (10A)

Batteries

• Typical backup times (minutes)*: 540W / 900W / 1800W
• 9PX 2000: 23 / 12 / 4
• 9PX 2000 + 1 EBM: 114 / 65 / 29
• 9PX 2000 + 4 EBM: 453 / 261 / 118
• Battery management: ABM? & Temperature-compensated charging method (user selectable), Automatic battery test, deep discharge protection, automatic recognition of external battery units

Communication

• Communication ports: 1 USB port + 1 serial RS232 port + 1 mini-terminal block for remote ON/OFF + 1 mini-terminal block for Remote Power Off + 1 mini-terminal block for Output relay
• Communication slot: 1 slot for Network-MS card, ModBus-MS or Relay-MS cards

Operating conditions, standards and approvals

• Operating temperature: 0 to 40 °C
• Typical Noise: level 40dB
• Safety: IEC/EN 62040-1, UL 1778, CSA 22.2
• EMC: IEC/EN 62040 -2, FCC Class B, CISPR22 Class B
• Approvals & Markings: CE /CB report (TUV) / cULus / EAC / RCM / KC / Energy Star

Dimensions H x W x D in mm/Weight

• UPS 2U version: 86,5*440*605/27.4kg
  EBM 2U version: 86,5*440*605/39.2kg

Customer Service and Support

• Warranty: 3 years
  * Backup times are approximate and may vary with equipment, configuration, battery age, temperature etc.

• The new graphical LCD display provides clear information on the UPS?s status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys.
• For the first time in the industry, the 5PX can meter energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton?s Intelligent Power? Software Suite.
• Load segment control enables prioritized shutdowns of nonessential equipment to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.
• The 5PX offers Serial and USB connectivity, plus an extra Mini-Slot for an optional communication card (including SNMP/Web card or relay contact card). Eaton?s Intelligent Power? Software Suite compatible with all major OS including virtualization software such as VMware and Hyper-V is included with each UPS.

Availability and Flexibility

• The 5PX comes in a rack/tower convertible cabinet – pedestal and rail kits are included with all models at no extra charge.
• Stronger, longer battery life: Eaton ABM? battery management technology uses an innovative three-stage charging technique that only recharges the battery when necessary, so the battery experiences less corrosion and service life is prolonged by up to 50%.
• Batteries can be hot-swapped without ever having to shut down connected equipment. With an optional, hot-swap maintenance bypass module, you can even replace the entire UPS.
• There is also the possibility to add more runtime with up to four external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognised by the UPS.

Performance and Efficiency

• With an optimised electrical design, the 5PX can provide up to 99% efficiency, reducing cooling and utility costs.
• With a power factor of 0.9, the 5PX delivers more real output power. It powers more servers than other UPSs with equivalent VA ratings and lower power factors. The 5PX is compatible with all modern IT equipment.
• When operating in battery mode, the 5PX provides a high-quality output waveform for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Technical Specifications

• Rating (VA/W): 2000VA/1800W
• Format: RT2U (Rack/Tower 2U)
• Technology: Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
• Input voltage and frequency ranges without using batteries: 160V-294V (adjustable to 150V-294V), 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
• Output voltage and frequency 230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)

Connections

• Input: 1 IEC C14 (10 A) socket
• Outputs: 8 IEC C13 (10 A)
• Remotely controlled sockets: 2 groups of 2 x IEC C13 (10 A)
• Additional outputs with Hot Swap MBP: 4 AUS 10A + 1 IEC 16A sockets or 6 IEC 10A sockets or terminal blocks (HW version)
• Additional outputs with FlexPDU: 6 AUS 10A + 1 IEC 16A sockets or 12 IEC 10 A sockets

Batteries 

• Typical backup times for 50 and 70% load*
• 5PX: 16/9 mins
• 5PX + 1 EBM: 66/39 mins
• 5PX + 4 EBM: 231/138 mins
• Battery management: ABM? & Temperature compensated charging method (user selectable), Automatic battery test, deep
• discharge protection, automatic recognition of external battery units

Interfaces

• Communication ports: 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously) + 1 mini terminal block for remote ON/OFF and Remote Power Off
• Communications card slots: 1 Mini Slot for Network Card-MS, Relay Card-MS and Network & Modbus Card-MS connectivity cards

Operating conditions, standards and approvals

• Operating temperature: 0 to 40 °C
• Noise Level: < 45 dBA
• Performance – Safety EMC: IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
• Approvals: CE, CB report, TV

Dimensions W x D x H / Weight

• UPS Dimensions (mm): 441 x 522 x 86.2 (2U)
• UPS Weight (kg): 28.5 kg
• Dimensions of EBM: same as UPS
• Weight of the EBM: 32.8 kg

Customer Service & Support

• Warranty: 3 years
  * Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.